Help Finding and Installing Flexible Moulding

Top Selling DURAFLEX Profiles	Standard Catalogue	Prestige Trims Catalogue	Moulding & Millwork Latest Catalogue 2012
Central Fairbank's Profiles	Rigid, MDF Mouldings	Flexible Photo Gallery	Installation Tips
Range of Flexibility	Flexible Wainscoting on Curved Staircases	Templates for Elliptical, Ovals & Radius Crown	Moulding & Millwork Catalogue 2013

Flexible Moulding Installation Tips

Fastening
For best results, the use of construction type adhesive in addition to pneumatic pin nailing to wall or ceiling abutments, Mitre Bond instant adhesive on all end joints, is recommended. Use of tape or clamps may be helpful in securing material in position while adhesives bond. Nails should be kept to a minimum 3/8" from any edge. 

Cutting
Material can be cut, shaped and sanded using standard woodworking equipment. Note that the wood grain on stain grade material is only on the surface and will be eliminated if sanded.

Staining
The use of water base stain such as Minwax work wells and is recommended. Apply with brush or rag and wipe off. Additional coats may be applied if necessary to match wood. Be sure to allow first coat to dry completely before applying more stain. Finish with clear coat after staining.

Painting
Primer coats are not recommended. Use water based Acrylic Latex Paint.
When using Alkyd Enamels an exterior primer such as Kilz® is required. When using Alkyd Enamels additional drying time may be necessary. Never paint before installation. The material is flexible and the paint may crack during installation.