Tapered PVC Post Wrap

Narrow, Tapered PVC Column Wrap either 56", 68" or 72" high, made to cover up to a 6 x 6 (actual size about 5 1/2 square) wooden support post. The Shaft is made from 1/2" thick PVC and is 9 7/8" at the bottom and 6 3/4" at the top, (only the height will vary) with the minimum opening being 5 3/4" square. The kit is shipped flat and packed with 2.5 oz. of PVC adhesive, tape, hardware, installation instructions and mounting cleats. This porch post cover comes with a Georgian Capital and Base (shown), which adds approximately 3 1/2" to both the top and bottom footprint of the shaft. As an upgrade, you may order a Box Cap and Base set that adds only 1 1/4" to the shaft thickness. We recommend either the Box Base or Box Capital for applications that have limited space.

Tapered columns can easily be cut lower to suit on-site. Remember, when cutting tapered columns, always cut from the bottom. The base will have to be cut to suit as well.

Caps and bases may occasionally be slightly larger than required. When placing an order for these columns, it is essential to confirm that you possess the necessary tools to adjust their size on-site. Failure to do so may result in the need to fill the gap between the base and the shafts after installation on site.

This is the same sized tapered column as used on our craftsman column wrap.